Jansamn Keg Coupler, Sankey D Tap with Stainless Steel Probe, Keg Coupler D System with Black Handle
【Stainless Steel Probe】 The Sankey keg coupler is composed of chrome-plated brass body and stainless steel probe, which will not wear away over time and still retain the beer flavor after long-term use. It can also provide better services for high-demand business environments such as bars, restaurants, and breweries.
【Safety Pressure Relief Valve No Gas Leaks】The pressure relief valve of keg tap coupler will automatically open on about 53 psi, allows excessive pressure gas to escape before it enters the keg. Its comes with two sets of silicone check valves and beer line washers for creating a seal between the coupler and the barb tailpiece to prevent gas/beer leak.
【Easy to Install & Lock】With this D coupler you also need a gas tank/co2 regulator faucet/brewing hose to let the gas transferred from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, then down the handle to lock keg coupler, pull the handle out to unlock sanke coupler.
Warm tips: The type of coupling configuration is the area that must match. Keg couplers are categorized by letters (L. E., S, G, U, D). each beer keg requires one and only one of these couplers. American beers typically use a D coupler. European beers typically uses a S coupler how to check whether the Sankey D keg coupler leaks or not？ the best way to check is to spray It with soapy water when it is under pressure and look for bubbles. There is a white lug under the gas in nipple that is held on by a hex nut. That prevents backflow into the regulator and also acts as a seal. It’s possible that that hex nut is not tightened enough or that check valve is misaligned, causing a bad seal Package includes: 1* keg coupler D system Stainless steel clamp
★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass
★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on
★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose
★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock
★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi
Included Components: Coupler, Tails, Hose Clamps
|Number Of Items
|Product Type Name